oi... i got a s***y old celeron 466.. which i can easily get to 581.. on a 83mhz bus.

most boards i have tried only allow my to push my good 'ol celeron no further than 83 bus.. hence not being able to destroy the bitch.... WHICH IS MY GOAL!!!
HAHAHAHAHA

anyway.. anybody no of a m/b capable of letting me set my poor little 466.. to ahh.. about 700+... MWAHAHAHA..

so yeah.. whats a good s370 intel board???????

a c should run at 100 bus you might just have a s*** one... :( what ram?

the problem with the 466 is that it uses the old PII core , and its .35 micron Fab, maybe with a pelt and a Fop38 ya be able to push the front side buss speed to 100mhz :)

haha peltier go the peltier

what does 'being a p2 core' and '.35 micron fab' have to do with how overclockable it is? all you got to do kakarot is up the voltage and front side bus, your multiplier is locked at 7 so you cant change that, a bios flash for your current motherboard should do the trick in regards to recognizing the speed above XXXmhz

i havent heard/read of much success with Celeron 466's though

the .35 was hotter the smaller the micron the cool (a tiny bit) it runs i think

ok.. i got pc133 (kingsmax ram) 128mg of it
well i got 256.. but i can only afford to fry 128 of it..=-)

umm.. yeah i adjust the voltage and all the little bits and pieces.. but she still wont go.. i want someone to tell me a motherboard that will let me change the bus to 100+.. as i cant go further than 83 atm... and i thought thats coz i got a s*** board....

celeron 466 does not go higher i've tried too on bout 4 diff boards including bx133 nope that cpu is f***ed

lol ash i guess you dont know much about overclocking
but the smaller .18 micron in the new copermine cores
have a smaler die size hence its less septiable to heat
the .35 micron die size genirates more heat and there for its harder to overclock.
also the pii core really suxed for overclocking.

I havent had good results with the 466 either, one went to 575, the other 525 (from memory, it was awhile ago).
Those early celeron cores were part of the P2 fab, they never came out higher than 600mhz, and there weren't a lot of 600s, more 500 and 550 chips in the P2.
I'd also suggest a peltier.

For a reasonable guide, go here.

you simply wont get the 466 to anything higher than 83mhz

procs based on the old core max out at 550 - 600 - it JUST WONT GO

afaik there were 2 sets of 466's put out. one on the ol p2 core and one a a newer core (p3?).

i got one that is runing at 66 nhz. and i think that means it was the old school one. the newer ones shoudl be runing on a 100 mhz fsb

giririss - nah man, the only Celeron chip that came out in .18 CuMine die and .25 PII Die was the 533 - hence the 533 and 533A

Addiontally, 466's are only celerons, PII's were never released at that speed. And the Celerons only started coming at 100 FSB v. recently (800 i think?)

you're thinking of the 533 and 533A

LOL, posted at the same time, mine was adreesed to giri, beat me to it ice
:)

o well.

hhah u mofokkrz shud obpn up a comptr mchanics iz us shop n u cn whear ovralls n pl brng ocmputrs in u like hye bro i kno it a 3442a momicronb thngo concectd toa 47meghz banabus n it wen ram dose fas thngs u iz can go bro bu i iz kno wot i tlak anot it a mouthrborfd it hsa 306 buses n i ocan do u cmoputr up so it run at heps fast lik 0121 monicrom 60mhz bus n then i iz can tunre i t up n thn put in a supr chargr colofan wit 173meghurz corre wit a celry 600 turbochrg nitrcoold 700hurtrz at the flywhel u smatrt bastids

I'm going to hunt u down and give u a manicure if u dont start posting in english (manicure with my axe)

WTF?
/me thinks mental patient forgot his PrOzAc this morning :P

the only celerons i thought that werebased on a p2 core was the 266-300-333 series, then they bought out a ppga package? and yes i realise the smaller the micron the less power usage therefore less heat primal im quite aware about overclocking seeing as i run 3 overclocked machines

so basically im f***ed.... i cant clock the bitch any further....
=-(

so basically im f***ed.... i cant clock the bitch any further....
=-(

oh wel... im over it...
=-)

my next question is: is it possible to unlock the multiplier on a p3 800 coppermine???????????
i heard rumours that fiddlin wif that pins and s*** does the same sort of thing as the pencil job with the durons.....
is there ANY truth here?

u catnt hndel the tryuth n it go a litl somhtn lik thsis if u ge t a cpoprmin n it run orut of copr u go to the glold mnine n whn u miene enuf golfd u trad it in n isz then u cn by a 37 durmnon n thn on the fron sid of the bus thr is 1010 menghiurt core wnhen the bus crsh the frotn of it is al boken so u hv yot upgrad n get multlipliers to fix ht e fron of the bus i here tht plierrs i s betr than spannr to fix thi stuf n aftr it fix u get 1023 monicrons u atch it to the fonr of u bus n thn it go supr fast n whn u driv over a clok it ovr heet coz the clok get cort in the radiatr n it fok evtin up so o ficx thi u iz hav to gtet wfart hed n driv ovr it n then u megahutrt him n it maks fo a bettr lif!!!

Sorry no can do with P3's Kakarot
Ash :D
Trog plz ban Him NOW FFS! :P

Ash: the only celerons i thought that werebased on a p2 core was the 266-300-333 series

The Celeron 266-300-333 was the same as a P2 except with NO L2 cache. the 300A-333A and up to 533 PPGA, were still the same core except with 128K of full speed on die cache.

i think i was getting confused when they changed from SECC2 to PPGA that is all, although i must say the chunkiness of the chips are miles apart