top_left top_right
bottom_left
Next Event: Unknown | Forum Rules | QGL Website | Event Registration
openFolder AusForums.com
iconwatfolderLineopenFolder LANs
iconwatfolderLineopenFolder QGL
iconwatfolderLineopenFolder QGL Forum
Author
Topic: Computer Prob
Mirage
Posts: 329
Location: Brisbane, Queensland

Problem: The computer will be running along fine and then randomly, the monitor would switch off (from green to orange light - so there's still power) and the computer would sound like it's on stand-by some how. I cannot make the monitor come back on again unless i turn the power off and wait a few seconds before turning it on again. All options in windows have been turned to "Never" turn off Monitor, Hard Disk and "Never" to use Standy-By mode. I'm using windows 2000.

I realise it's not a lot of information but i hope maybe someone has had the same problem and has figured out what caused it. It is a fairly new monitor, Viewsonic 19" E790. Today it shut off when i was browsing through the options of Wolfenstein test twice and the third time it did it as i was restarting and was just typing in the password login for the computer. It was happening a while ago but it seemed to stop and now it has begun again. It seems to be a random occurance as it happens when browsing the net, playing a game or at the windows login screen.

Anyone with some reasonable/serious suggestions - i'm all ears. Thanks.
system
--
WarT
Posts: 5458
Location: Brisbane, Queensland

machien specs??
what size psu?
-Eds-
Posts: 2741
Location: Brisbane, Queensland

check your power management in your bios as well
cainer
Posts: 178
Location: Brisbane, Queensland

make sure its plugged in properly
Mirage
Posts: 330
Location: Brisbane, Queensland

It's a 300watt PSU.
K7T Pro 2-A mobo
1.2ghz amd t-bird
320 SD ram


I'll check the power management in bios too right now, eds. Ta.
GeNociDe
Posts: 1015
Location: Brisbane, Queensland

yer mine used to do this

cant remember what is was. wasnt monitor
Mirage
Posts: 331
Location: Brisbane, Queensland

Try and remember, Geno. I dont think it's the monitor either. I checked the Power Management under bios, everything is fine. It actually says the LED lights on the mainboard would blink if it was on Stand-by mode - and they dont blink when this happens.

Try and remember!
-Eds-
Posts: 2742
Location: Brisbane, Queensland

kick it
worfa
Posts: 446
Location: Gold Coast, Queensland

try other monitors and stuff etc, find out where the problem is. then and ONLY then, kick it
GeNociDe
Posts: 1016
Location: Brisbane, Queensland

um ok.

well. in the past i have had problems with - PSU, ram, and video card

what i found out was - my ram was absolutely rooted, and my AGP video car dwasnt getting the power it needed. all as a result of a dying PSU

back then it cost me about 600 dollars. all cause of a 30 dollar PSU.

there. i remember.

i dont know EXACTLY what was causing my monitor to switch to standby but i guess it was video card.

there ....
WarT
Posts: 5459
Location: Brisbane, Queensland

and if kicking doesn't work, hit it with a hammer
WhoopAss
Posts: 89
Location: Brisbane, Queensland

sorry if I missed it, but what video card have u got? (sorry if you said already, but I'm sick, so forgive me)
Koopz
Posts: 1555
Location: Brisbane, Queensland

* N U K E D *


By Koopz
Mirage
Posts: 332
Location: Brisbane, Queensland

It's an Asus GF2 MX v7100
CaPt0
Posts: 1242
Location: Brisbane, Queensland

monitor in wall or powersupply?
GORE^iLA-X
Posts: 309
Location: Gold Coast, Queensland

and if hitting it with a hammer doesn't work start crying like a little bitch
Mirage
Posts: 333
Location: Brisbane, Queensland

Monitor in wall.

I dont think it's a power problem. It's got to be something else.
StreX
Posts: 1544
Location: Brisbane, Queensland

C'mon, somebody help him out with this in a way that does not involve physically abusing his monitor (I need Mirage for a DoD war tomorrow night).
Raraku
Posts: 198
Location: Brisbane, Queensland

The light going from green to orange only usualy occurs when there is no signal from the pc to the monitor, or if it has been soft powered down. The only things you CAN do are to try a different monitor for a period of time

Also over what period of time does this problem occur? a few mins? Hours? etc

I doubt its anything apart from a Monitor or perhaps a Video Card problem. The video ram could be shonky but I dont know..

Mirage
Posts: 334
Location: Brisbane, Queensland

I've never waited for it to turn back on...

Seems to me that it's gonna stay off. I've been told that the monitor could be losing the signal - but what would trigger that?

Raraku, this problem has happend before about a month ago, and it basically went away by itself. Now it just came back this morning.
Raraku
Posts: 199
Location: Brisbane, Queensland

I mean is there any length of time the PC is on before the monitor goes or is it random?

Loosing the signal is only caused by a few things - The cable becomming disconnected, a video card which stops working (very unlikely as the pc boots with)

If you can remember, what things were you doing before this happened? any new programs etc?

Also, I dont know what the program is in 2k, but in 98 its called msconfig, if you can get into the start menu disable the power management from starting up when you load your os. I do this in 98 to save on resources, but i dont know what it could do to 2k better ask a 2k expert before you do

chrispy
Posts: 133
Location: Brisbane, Queensland

1.Get a mates monitor and check to see if it happens still.
2. Get a mates Vid card test to see if it happens still
3. Repeat steps 1 and 2 and substitute in every part on the computer until u find the faulty bastard
Shot_guN
Posts: 1223
Location: Brisbane, Queensland

This is going to sounds weird, but perhaps the monitor has a problem, is overheating, and in order to cool down, stop recieving images for a perios of time.

just a suggestion, its never happened to me.
Mirage
Posts: 335
Location: Brisbane, Queensland

It's just random, Raraku. The wolf test was installed this morning when it seemed to have started this sleep mode stuff. I've un-installed the wolf test but the monitor still shuts off. My younger brother may have installed something else though, i'll have to found out. I've checked the cabling, and like you said, unlikely that it's the vid card.

there's no msconfig-like thing in win2k, stuff like that needs to be done through registry i think. I've been looking through the processes under task manager though, seeing what each file does.

Well, i'll shut down. Sleep, and in the morning, shut guns advice will have worked, heh.
Raraku
Posts: 203
Location: Brisbane, Queensland

Well, if you're still stuck tommrow, I have a monitor and video card here (its pci) and if you feel like a drive your welcome to borrow them for testing, I hate to see people with problems which nobody knows how to fix

Good luck mate

Hunter
Posts: 1699
Location: Brisbane, Queensland

It could possibly be a loose solder joint - it is a common problem with any CRT-based display unit. Its caused by either s*** solder and soldering, or possibly heat stress from heating up and cooling down all the time (CRTs have a special heating element to aid movement of the electrons). Don't check the joints yourself though, as you probably know theres really nasty voltages inside them :).
WhoopAss
Posts: 91
Location: Brisbane, Queensland

my monitor did that once, just shut down, but it wouldn't come back at all, I sent it back to the manufacturer's & they fixed it, I think they told me it was a faulty power supply..........

My other monitor likes to change colours on me, the wires inside the cable are broken right at the RF filetr (that big round thing near the plug) If u jiggle it there the colours come good again, maybe the signal wire is broken inside ur monitor, do you plug & unplug it alot?
silver_ice
Posts: 241
Location: Brisbane, Queensland

yeh thats what i was thinking, the actual vga cable in your monitor that comes out and connects to the vid card my be busted somewhat in there

easy fix tho, just take it to a monitor repairer - hopefully do it same day
Mirage
Posts: 336
Location: Brisbane, Queensland

:p
Mirage
Posts: 337
Location: Brisbane, Queensland

Ok, i'll change monitors first and see if the same thing happens. Thanks for your help fella's.
system
--
Not a new post since your last visit.
New Post Since your last visit
Back To Forum
Advertise with Us | Privacy Policy | Contact Us
© Copyright 2001-2026 AusGamers Pty Ltd. ACN 093 772 242.
Hosted by Mammoth Networks - Australian VPS Hosting
Web development by Mammoth Media.