top_left top_right
bottom_left
Next Event: Unknown | Forum Rules | QGL Website | Event Registration
openFolder AusForums.com
iconwatfolderLineopenFolder LANs
iconwatfolderLineopenFolder QGL
iconwatfolderLineopenFolder QGL Forum
Author
Topic: Windows XP Problem
Eds
Posts: 7755
Location: Brisbane, Queensland
OOOOOKKKKKK

Having a problem with XP iv not seen before.

Basicly when booting, the system will hang right before the Windows XP logo comes up with the blue loading bar. It just sits at black. Same goes with running it in safe mode. I believe it is a os problem, as Iv run hdd, ram, motherboard and cpu through diagnostics and stress tests, and everything has come back fine. It ran fine, just stopped the other night.

Anyone seen this or have any ideas?
system
--
parabol
Posts: 1842
Location: Brisbane, Queensland
Man it's Windows. The problem could be anything, considering the OS gives so little feedback!

I had similar symptoms in the past and ended up being the fact that Windows refused to boot if there was a CD in the drive. Yes, very weird indeed. But I'm 95% sure that isn't your problem, seeing as there are so many reasons why your OS could possibly refuse to boot.
whoop
Posts: 9330
Location: Brisbane, Queensland
so far I've gone through a new burner a new hard drive and a fresh install of windows trying to fix that stupid error. It'll just sit there for AAAAGES at the black screen before it gets to windows. Solution? install linux. Seriously, I got nothin, I thought maybe it was my video card being lame & taking a while to get going but I dunno.
0z
Posts: 1245
Location: Brisbane, Queensland
installed the 81.85 whql drivers recently? coz they screwed my hdtv 6600gt agp box.

EDIT: eds i do have a issue with the nforce ethernet + nvidia firewall takes ages to load, not sure if your using the nforce 4 ethernet but try disabling it in bios, also you tryed to remove / disable non essental bios items (floppy/com/printer/ide if you use sata...) and pci/pci-e cards?


last edited by 0z at 11:39:26 25/Oct/05
Eds
Posts: 7756
Location: Brisbane, Queensland
I run linux, but this is my parents machine :)

Parabol, TELL me about it :P

Oz, nah, havnt updated any drivers or patches.
thrax
Posts: 2927
Location: Brisbane, Queensland
Eds be more specific plz. Nother worst than someone that dose not provided the facts, i.e is the hardware sitting right, has there been any updates latey, etc.

How about ghosting the HDD to a DVD or another drive than blowing away the OS and rebuilding it, and see if the problem still exist within the OS. than if it is, just import the profile and install and other stuff that is required.

last edited by thrax at 22:53:54 24/Oct/05
Reverend Evil
Posts: 12566
Location: Wynnum, Queensland
Give Microsoft a call and they'll fix it for you.
Mymatsu
Posts: 8
Location:
Just reformat and be done with it...
0z
Posts: 1247
Location: Brisbane, Queensland
you can allways copy your "c:/windows/reapair/" files to "c:/windows/system32/config/" folder but that will result in loosing all your registry and installed applications (there still loaded just not in registry), its like you just did a fresh install winblows xp, done under windows boot cd in recovery mode.


last edited by 0z at 10:41:45 25/Oct/05
rolo_tomasi
Posts: 1115
Location: Sunshine Coast, Queensland
I had same recently, except I had a flashing cursor on black screen. For no reason at all as well. out of the blue. So anyway I pulled out a couple of PCI cards, put em back in, disconnected LAN cables, problem gone ???!!?

Apart from that its XP, maybe reinstall during the next full moon and throw in a human sacrifice just to make sure it dont f*** up. :P
system
--
Not a new post since your last visit.
New Post Since your last visit
Back To Forum
Advertise with Us | Privacy Policy | Contact Us
© Copyright 2001-2026 AusGamers Pty Ltd. ACN 093 772 242.
Hosted by Mammoth Networks - Australian VPS Hosting
Web development by Mammoth Media.